Ck boil c

Boiler Water Treatment Product

CK BOIL-C is a boiler water additive. It disrupts the crystal structure of scale-forming minerals in the water, rendering them amorphous, and prevents them from adhering to boiler and pipe surfaces. Thanks to the oxygen scavengers it contains, it provides protection against corrosion on boiler and pipe surfaces. By raising the pH level in the steam line, it protects the lines against carbonic acid corrosion. It is sufficient on its own for a boiler water treatment program and requires no additional products.

Directions for Use:
CK BOIL-C is dosed into the boiler suction line, the condensate tank, or directly into the boiler using a dosing pump. For a boiler that has not previously used a water treatment chemical, the initial dosage of CK – BOIL-C is 200 grams per 1 metric ton of boiler water. Subsequently, 50–100 grams of CK–BOIL-C is dosed for every 1 metric ton of feedwater. (Dosing rates are calculated assuming the boiler is fed with evaporator water. The hardness value is assumed to be 10 ppm. The CK–BOIL-C dosing amount varies depending on the quality of the feedwater.)

Kazan suyunda önerilen değerler:
P.Alkalinite     : 100 – 300 ppm
pH                   : 9 – 10,5
Klorür              : < 300 ppm
Klorür ve p.alkalinite değerleri önerilenden büyükse kazan blöf edilmelidir.
Buhar dönüş hatlarında önerilen değerler:
pH                     : 8,2 – 9

Physical Properties:
Appearance : Light yellow liquid
Density : 1.00 – 1.10 g/cm³
pH : 10.5 – 11.5
Flash Point : None
Corrosive Effect : When in direct contact in its pure form, it may have a corrosive effect on all types of metal.