Cooling tower
The air-conditioning load goes to an open tower. Evaporation raises hardness. Air and sun grow biofilm.
Company
About usDealershipCertificatesReferencesBlogSearch the siteContact
+90 (216) 573 4014[email protected]
In a hotel, water carries guest comfort and the steam for the kitchen and the laundry. The tower and the hot water carry a hygiene risk. The closed loop and the boiler are watched separately.
Scale in a cooling tower · Corrosion in a closed loop · Scale in a steam boiler
The air-conditioning load goes to an open tower. Evaporation raises hardness. Air and sun grow biofilm.
The guest waits for hot water. A low temperature and a stagnant line hold biofilm.
Closed heating and cooling water is replaced rarely. Oxygen and sludge attack the metal.
The steam boiler serves the laundry and the kitchen. Scale raises fuel use.
An open tower and the hot water can grow a Legionella risk if they hold biofilm. C biocide 886 lowers that risk in open cooling.
If the chiller cannot cool, the room temperature rises. Scale and sludge close the exchanger.
Heating water that is replaced rarely goes to corrosion and sludge. A radiator does not heat in one area.
If steam stops, the kitchen and the laundry stop. Boiler scale burns more fuel for the same load.
C biocide 886 is put in the program for biofilm in open cooling. Scale needs a separate tower chemical.
Check the hot-water temperature and the end point on a regular schedule. Flush a stagnant line.
Put a corrosion inhibitor in the heating circuit. If there is a freeze risk, select the antifreeze separately.
Treat the laundry and kitchen boiler from the feed water analysis.
The tower, the closed loop and the steam boiler are separate jobs. NSF approval applies only to Cefopol 1040, Cemolin 1080 and Ck 229. The dosage is set from the water analysis.
Biocide for Open Cooling Systems
It prevents biofilm in open cooling and lowers the Legionella risk.
Stabilized Phosphate Cooling Water Treatment Chemical
It decreases the risk of scaling and corrosion in cooling towers.
Stabilized Phosphate Cooling Water Treatment Chemical – For Copper (NSF APPROVED)
It is an NSF approved cooling-water chemical for copper. It prevents scale and corrosion.
Nitrite-Based Corrosion Inhibitor for Closed-Loop Heating and Cooling Systems – Copper Protection
It protects copper surfaces against corrosion in closed-loop heating and cooling.
Multifunctional Steam Boiler Scale and Corrosion Inhibitor – NSF Approved
It is an NSF approved boiler chemical. It prevents scaling and protects the metal against corrosion.
Steam Line Corrosion Inhibitor – NSF approved
It is an NSF approved steam-line inhibitor. It decreases the corrosion risk in the line.

Cemkimsan makes the chemical in its own plant and ships it. The hotel program is set from the tower water analysis and the boiler water analysis.
C biocide 886 prevents biofilm in open cooling and lowers the Legionella risk. Ck 220 is also used for scale. The application frequency is set from the biological load in the tower.
Check the chiller and the closed-loop water. Scale and sludge can close the exchanger. Ck 13 protects the copper surface in the closed loop.
Cefopol 1040 prevents scale and corrosion in the boiler water. Cemolin 1080 lowers the corrosion risk in the steam line. Both are NSF approved. The choice depends on the feed water analysis.
A stagnant, warm line holds biofilm. Read the temperature and the end point on a regular schedule. This job does not replace the tower biocide.
Send your tower water analysis and your hot-water routine. Our technical team will reply on the biocide, the tower and the boiler.
We reply to quote requests within 12 hours.