Mud Slit Remover
Sludge Remover
MUD & SILT REMOVER is a ballast water additive. It is an organic polyelectrolyte. It removes the adhesion potential of mud, dust and silt in the…
Company
About usCertificatesReferencesBlogSearch the siteContact
+90 (216) 573 4014[email protected]Boiler Water Alkalinity – pH Adjuster
CK – ALK is a boiler water additive. It increases the pH of boiler water. Thus, it stabilizes the corrosive conditions that low pH causes. You can also use it as a neutralization material after acid cleaning.
Use a dosing pump to dose CK – ALK. Dose it into the boiler suction line, the condensate tank or directly into the boiler. Monitor the pH of the boiler water during the application. The correct pH range of the boiler water is 9 – 10.5. When the pH is less than 9, dose 250 ml. of CK – ALK for each ton of water and measure again. When the pH of the boiler water is in the usual range of 9 – 10.5, stop the dosing. If it is not, dose again until the pH is in the usual range. During the application, wear protective clothing, gloves, goggles and a mask. Make sure that the area has good ventilation.
| Appearance | Colorless liquid |
|---|---|
| Density | 1.30 – 1.40 g/cm³ |
| pH | > 13 |
| Flash Point | None |
| Corrosive Effect | Contact with the undiluted product can cause corrosion on all metals. |
Sludge Remover
MUD & SILT REMOVER is a ballast water additive. It is an organic polyelectrolyte. It removes the adhesion potential of mud, dust and silt in the…
Toilet Cleaner
CKS TDS LIQUID is an acidic liquid product. It removes inorganic and organic material, uric acid, lime residues and stains in toilets, sinks and…
Toilet Cleaner
CKS – TDS is an acidic powder product. It removes inorganic and organic material, uric acid, lime residues and stains in toilets, sinks and…
Get a quote for Ck alk
Send us your requirement and your system data. We will send you a dosage and a price. +90 (216) 573 4014 · [email protected]