C-amin 42

Corrosion Inhibitor in Closed Circuit Heating and Cooling Systems

This is a polyamine-based corrosion inhibitor for closed-loop heating and cooling systems. It can be safely used in systems containing carbon steel, copper, and aluminum. The polyamines it contains form a protective film on the metal surface, preventing contact between the metal surface and dissolved oxygen. It adjusts the pH of the closed-loop system to the range of 7.5–8.5, where the corrosion rate of aluminum is minimal. It disrupts the crystal structure of scale-forming minerals in the water, turning them into an amorphous state, and prevents them from adhering to the metal surface.

Directions for Use:
It should be dosed into the C AMIN 42 supply manifold using a dosing pump. Do not dilute.

Specifications:
pH: 7.5 – 8.5
Polyamine: 0.5 – 2 ppm
The exact dosage will be determined by a Cemkimsan Water Treatment Consultant.
Protective clothing, gloves, goggles, and a mask must be worn during application.

Physical Properties:
Appearance : Turbid liquid
Density : 0.95 – 1.00^g/cm³(20 ^°C)
pH : 8 – 9 (20 ^°C)
Flash Point : None
Corrosive Effect : None
Solubility : Insoluble in water