The right choice of product for membrane cleaning depends on the type of fouling—while C-mec 200 is preferred for organic and biological fouling, our acidic cleaners (C-mec 102, C-mec 100) should be used for mineral deposits.
The cleaning program and dosage appropriate for your system are determined by Cemkimsan water treatment consultants based on your feedwater and fouling analysis.
Directions for Use:
can be diluted up to 10%. The cleaning process is performed using either the circulation or immersion method. The R.O. unit must be taken out of service during the cleaning process. If an acidic cleaning is also to be performed, the alkaline cleaning with C-MEC 200 must be carried out after the acidic cleaning. Protective clothing, gloves, goggles, and a mask must be worn during application, and the area must be well-ventilated.
Physical Properties:
Appearance : Light yellow liquid
Density : 1,10 - 1,15 gr/cm3
pH : 12.5 - 13.0 (1% solution)
Flash Point : None
Corrosive Effect : May have corrosive effect on all kinds of metals in pure contact.